彻底改版2.0

tool/comtool/form/form.pri

@@ -0,0 +1,8 @@
+FORMS += \
+    $$PWD/frmcomtool.ui
+
+HEADERS += \
+    $$PWD/frmcomtool.h
+
+SOURCES += \
+    $$PWD/frmcomtool.cpp

tool/comtool/form/frmcomtool.cpp

@@ -0,0 +1,588 @@
+#include "frmcomtool.h"
+#include "ui_frmcomtool.h"
+#include "quihelper.h"
+#include "quihelperdata.h"
+
+frmComTool::frmComTool(QWidget *parent) : QWidget(parent), ui(new Ui::frmComTool)
+{
+    ui->setupUi(this);
+    this->initForm();
+    this->initConfig();
+    QUIHelper::setFormInCenter(this);
+}
+
+frmComTool::~frmComTool()
+{
+    delete ui;
+}
+
+void frmComTool::initForm()
+{
+    comOk = false;
+    com = 0;
+    sleepTime = 10;
+    receiveCount = 0;
+    sendCount = 0;
+    isShow = true;
+
+    ui->cboxSendInterval->addItems(AppData::Intervals);
+    ui->cboxData->addItems(AppData::Datas);
+
+    //读取数据
+    timerRead = new QTimer(this);
+    timerRead->setInterval(100);
+    connect(timerRead, SIGNAL(timeout()), this, SLOT(readData()));
+
+    //发送数据
+    timerSend = new QTimer(this);
+    connect(timerSend, SIGNAL(timeout()), this, SLOT(sendData()));
+    connect(ui->btnSend, SIGNAL(clicked()), this, SLOT(sendData()));
+
+    //保存数据
+    timerSave = new QTimer(this);
+    connect(timerSave, SIGNAL(timeout()), this, SLOT(saveData()));
+    connect(ui->btnSave, SIGNAL(clicked()), this, SLOT(saveData()));
+
+    ui->tabWidget->setCurrentIndex(0);
+    changeEnable(false);
+
+    tcpOk = false;
+    socket = new QTcpSocket(this);
+    socket->abort();
+    connect(socket, SIGNAL(readyRead()), this, SLOT(readDataNet()));
+#if (QT_VERSION >= QT_VERSION_CHECK(6,0,0))
+    connect(socket, SIGNAL(errorOccurred(QAbstractSocket::SocketError)), this, SLOT(readErrorNet()));
+#else
+    connect(socket, SIGNAL(error(QAbstractSocket::SocketError)), this, SLOT(readErrorNet()));
+#endif
+
+    timerConnect = new QTimer(this);
+    connect(timerConnect, SIGNAL(timeout()), this, SLOT(connectNet()));
+    timerConnect->setInterval(3000);
+    timerConnect->start();
+
+#ifdef __arm__
+    ui->widgetRight->setFixedWidth(280);
+#endif
+}
+
+void frmComTool::initConfig()
+{
+    QStringList comList;
+    for (int i = 1; i <= 20; i++) {
+        comList << QString("COM%1").arg(i);
+    }
+
+    comList << "ttyUSB0" << "ttyS0" << "ttyS1" << "ttyS2" << "ttyS3" << "ttyS4";
+    comList << "ttymxc1" << "ttymxc2" << "ttymxc3" << "ttymxc4";
+    comList << "ttySAC1" << "ttySAC2" << "ttySAC3" << "ttySAC4";
+    ui->cboxPortName->addItems(comList);
+    ui->cboxPortName->setCurrentIndex(ui->cboxPortName->findText(AppConfig::PortName));
+    connect(ui->cboxPortName, SIGNAL(currentIndexChanged(int)), this, SLOT(saveConfig()));
+
+    QStringList baudList;
+    baudList << "50" << "75" << "100" << "134" << "150" << "200" << "300" << "600" << "1200"
+             << "1800" << "2400" << "4800" << "9600" << "14400" << "19200" << "38400"
+             << "56000" << "57600" << "76800" << "115200" << "128000" << "256000";
+
+    ui->cboxBaudRate->addItems(baudList);
+    ui->cboxBaudRate->setCurrentIndex(ui->cboxBaudRate->findText(QString::number(AppConfig::BaudRate)));
+    connect(ui->cboxBaudRate, SIGNAL(currentIndexChanged(int)), this, SLOT(saveConfig()));
+
+    QStringList dataBitsList;
+    dataBitsList << "5" << "6" << "7" << "8";
+
+    ui->cboxDataBit->addItems(dataBitsList);
+    ui->cboxDataBit->setCurrentIndex(ui->cboxDataBit->findText(QString::number(AppConfig::DataBit)));
+    connect(ui->cboxDataBit, SIGNAL(currentIndexChanged(int)), this, SLOT(saveConfig()));
+
+    QStringList parityList;
+    parityList << "无" << "奇" << "偶";
+#ifdef Q_OS_WIN
+    parityList << "标志";
+#endif
+    parityList << "空格";
+
+    ui->cboxParity->addItems(parityList);
+    ui->cboxParity->setCurrentIndex(ui->cboxParity->findText(AppConfig::Parity));
+    connect(ui->cboxParity, SIGNAL(currentIndexChanged(int)), this, SLOT(saveConfig()));
+
+    QStringList stopBitsList;
+    stopBitsList << "1";
+#ifdef Q_OS_WIN
+    stopBitsList << "1.5";
+#endif
+    stopBitsList << "2";
+
+    ui->cboxStopBit->addItems(stopBitsList);
+    ui->cboxStopBit->setCurrentIndex(ui->cboxStopBit->findText(QString::number(AppConfig::StopBit)));
+    connect(ui->cboxStopBit, SIGNAL(currentIndexChanged(int)), this, SLOT(saveConfig()));
+
+    ui->ckHexSend->setChecked(AppConfig::HexSend);
+    connect(ui->ckHexSend, SIGNAL(stateChanged(int)), this, SLOT(saveConfig()));
+
+    ui->ckHexReceive->setChecked(AppConfig::HexReceive);
+    connect(ui->ckHexReceive, SIGNAL(stateChanged(int)), this, SLOT(saveConfig()));
+
+    ui->ckDebug->setChecked(AppConfig::Debug);
+    connect(ui->ckDebug, SIGNAL(stateChanged(int)), this, SLOT(saveConfig()));
+
+    ui->ckAutoClear->setChecked(AppConfig::AutoClear);
+    connect(ui->ckAutoClear, SIGNAL(stateChanged(int)), this, SLOT(saveConfig()));
+
+    ui->ckAutoSend->setChecked(AppConfig::AutoSend);
+    connect(ui->ckAutoSend, SIGNAL(stateChanged(int)), this, SLOT(saveConfig()));
+
+    ui->ckAutoSave->setChecked(AppConfig::AutoSave);
+    connect(ui->ckAutoSave, SIGNAL(stateChanged(int)), this, SLOT(saveConfig()));
+
+    QStringList sendInterval;
+    QStringList saveInterval;
+    sendInterval << "100" << "300" << "500";
+
+    for (int i = 1000; i <= 10000; i = i + 1000) {
+        sendInterval << QString::number(i);
+        saveInterval << QString::number(i);
+    }
+
+    ui->cboxSendInterval->addItems(sendInterval);
+    ui->cboxSaveInterval->addItems(saveInterval);
+
+    ui->cboxSendInterval->setCurrentIndex(ui->cboxSendInterval->findText(QString::number(AppConfig::SendInterval)));
+    connect(ui->cboxSendInterval, SIGNAL(currentIndexChanged(int)), this, SLOT(saveConfig()));
+    ui->cboxSaveInterval->setCurrentIndex(ui->cboxSaveInterval->findText(QString::number(AppConfig::SaveInterval)));
+    connect(ui->cboxSaveInterval, SIGNAL(currentIndexChanged(int)), this, SLOT(saveConfig()));
+
+    timerSend->setInterval(AppConfig::SendInterval);
+    timerSave->setInterval(AppConfig::SaveInterval);
+
+    if (AppConfig::AutoSend) {
+        timerSend->start();
+    }
+
+    if (AppConfig::AutoSave) {
+        timerSave->start();
+    }
+
+    //串口转网络部分
+    ui->cboxMode->setCurrentIndex(ui->cboxMode->findText(AppConfig::Mode));
+    connect(ui->cboxMode, SIGNAL(currentIndexChanged(int)), this, SLOT(saveConfig()));
+
+    ui->txtServerIP->setText(AppConfig::ServerIP);
+    connect(ui->txtServerIP, SIGNAL(textChanged(QString)), this, SLOT(saveConfig()));
+
+    ui->txtServerPort->setText(QString::number(AppConfig::ServerPort));
+    connect(ui->txtServerPort, SIGNAL(textChanged(QString)), this, SLOT(saveConfig()));
+
+    ui->txtListenPort->setText(QString::number(AppConfig::ListenPort));
+    connect(ui->txtListenPort, SIGNAL(textChanged(QString)), this, SLOT(saveConfig()));
+
+    QStringList values;
+    values << "0" << "10" << "50";
+
+    for (int i = 100; i < 1000; i = i + 100) {
+        values << QString("%1").arg(i);
+    }
+
+    ui->cboxSleepTime->addItems(values);
+
+    ui->cboxSleepTime->setCurrentIndex(ui->cboxSleepTime->findText(QString::number(AppConfig::SleepTime)));
+    connect(ui->cboxSleepTime, SIGNAL(currentIndexChanged(int)), this, SLOT(saveConfig()));
+
+    ui->ckAutoConnect->setChecked(AppConfig::AutoConnect);
+    connect(ui->ckAutoConnect, SIGNAL(stateChanged(int)), this, SLOT(saveConfig()));
+}
+
+void frmComTool::saveConfig()
+{
+    AppConfig::PortName = ui->cboxPortName->currentText();
+    AppConfig::BaudRate = ui->cboxBaudRate->currentText().toInt();
+    AppConfig::DataBit = ui->cboxDataBit->currentText().toInt();
+    AppConfig::Parity = ui->cboxParity->currentText();
+    AppConfig::StopBit = ui->cboxStopBit->currentText().toDouble();
+
+    AppConfig::HexSend = ui->ckHexSend->isChecked();
+    AppConfig::HexReceive = ui->ckHexReceive->isChecked();
+    AppConfig::Debug = ui->ckDebug->isChecked();
+    AppConfig::AutoClear = ui->ckAutoClear->isChecked();
+
+    AppConfig::AutoSend = ui->ckAutoSend->isChecked();
+    AppConfig::AutoSave = ui->ckAutoSave->isChecked();
+
+    int sendInterval = ui->cboxSendInterval->currentText().toInt();
+    if (sendInterval != AppConfig::SendInterval) {
+        AppConfig::SendInterval = sendInterval;
+        timerSend->setInterval(AppConfig::SendInterval);
+    }
+
+    int saveInterval = ui->cboxSaveInterval->currentText().toInt();
+    if (saveInterval != AppConfig::SaveInterval) {
+        AppConfig::SaveInterval = saveInterval;
+        timerSave->setInterval(AppConfig::SaveInterval);
+    }
+
+    AppConfig::Mode = ui->cboxMode->currentText();
+    AppConfig::ServerIP = ui->txtServerIP->text().trimmed();
+    AppConfig::ServerPort = ui->txtServerPort->text().toInt();
+    AppConfig::ListenPort = ui->txtListenPort->text().toInt();
+    AppConfig::SleepTime = ui->cboxSleepTime->currentText().toInt();
+    AppConfig::AutoConnect = ui->ckAutoConnect->isChecked();
+
+    AppConfig::writeConfig();
+}
+
+void frmComTool::changeEnable(bool b)
+{
+    ui->cboxBaudRate->setEnabled(!b);
+    ui->cboxDataBit->setEnabled(!b);
+    ui->cboxParity->setEnabled(!b);
+    ui->cboxPortName->setEnabled(!b);
+    ui->cboxStopBit->setEnabled(!b);
+    ui->btnSend->setEnabled(b);
+    ui->ckAutoSend->setEnabled(b);
+    ui->ckAutoSave->setEnabled(b);
+}
+
+void frmComTool::append(int type, const QString &data, bool clear)
+{
+    static int currentCount = 0;
+    static int maxCount = 100;
+
+    if (clear) {
+        ui->txtMain->clear();
+        currentCount = 0;
+        return;
+    }
+
+    if (currentCount >= maxCount) {
+        ui->txtMain->clear();
+        currentCount = 0;
+    }
+
+    if (!isShow) {
+        return;
+    }
+
+    //过滤回车换行符
+    QString strData = data;
+    strData = strData.replace("\r", "");
+    strData = strData.replace("\n", "");
+
+    //不同类型不同颜色显示
+    QString strType;
+    if (type == 0) {
+        strType = "串口发送 >>";
+        ui->txtMain->setTextColor(QColor("dodgerblue"));
+    } else if (type == 1) {
+        strType = "串口接收 <<";
+        ui->txtMain->setTextColor(QColor("red"));
+    } else if (type == 2) {
+        strType = "处理延时 >>";
+        ui->txtMain->setTextColor(QColor("gray"));
+    } else if (type == 3) {
+        strType = "正在校验 >>";
+        ui->txtMain->setTextColor(QColor("green"));
+    } else if (type == 4) {
+        strType = "网络发送 >>";
+        ui->txtMain->setTextColor(QColor(24, 189, 155));
+    } else if (type == 5) {
+        strType = "网络接收 <<";
+        ui->txtMain->setTextColor(QColor(255, 107, 107));
+    } else if (type == 6) {
+        strType = "提示信息 >>";
+        ui->txtMain->setTextColor(QColor(100, 184, 255));
+    }
+
+    strData = QString("时间[%1] %2 %3").arg(TIMEMS).arg(strType).arg(strData);
+    ui->txtMain->append(strData);
+    currentCount++;
+}
+
+void frmComTool::readData()
+{
+    if (com->bytesAvailable() <= 0) {
+        return;
+    }
+
+    QUIHelper::sleep(sleepTime);
+    QByteArray data = com->readAll();
+    int dataLen = data.length();
+    if (dataLen <= 0) {
+        return;
+    }
+
+    if (isShow) {
+        QString buffer;
+        if (ui->ckHexReceive->isChecked()) {
+            buffer = QUIHelperData::byteArrayToHexStr(data);
+        } else {
+            //buffer = QUIHelperData::byteArrayToAsciiStr(data);
+            buffer = QString::fromLocal8Bit(data);
+        }
+
+        //启用调试则模拟调试数据
+        if (ui->ckDebug->isChecked()) {
+            int count = AppData::Keys.count();
+            for (int i = 0; i < count; i++) {
+                if (buffer.startsWith(AppData::Keys.at(i))) {
+                    sendData(AppData::Values.at(i));
+                    break;
+                }
+            }
+        }
+
+        append(1, buffer);
+        receiveCount = receiveCount + data.size();
+        ui->btnReceiveCount->setText(QString("接收 : %1 字节").arg(receiveCount));
+
+        //启用网络转发则调用网络发送数据
+        if (tcpOk) {
+            socket->write(data);
+            append(4, QString(buffer));
+        }
+    }
+}
+
+void frmComTool::sendData()
+{
+    QString str = ui->cboxData->currentText();
+    if (str.isEmpty()) {
+        ui->cboxData->setFocus();
+        return;
+    }
+
+    sendData(str);
+
+    if (ui->ckAutoClear->isChecked()) {
+        ui->cboxData->setCurrentIndex(-1);
+        ui->cboxData->setFocus();
+    }
+}
+
+void frmComTool::sendData(QString data)
+{
+    if (com == 0 || !com->isOpen()) {
+        return;
+    }
+
+    //短信猫调试
+    if (data.startsWith("AT")) {
+        data += "\r";
+    }
+
+    QByteArray buffer;
+    if (ui->ckHexSend->isChecked()) {
+        buffer = QUIHelperData::hexStrToByteArray(data);
+    } else {
+        buffer = QUIHelperData::asciiStrToByteArray(data);
+    }
+
+    com->write(buffer);
+    append(0, data);
+    sendCount = sendCount + buffer.size();
+    ui->btnSendCount->setText(QString("发送 : %1 字节").arg(sendCount));
+}
+
+void frmComTool::saveData()
+{
+    QString tempData = ui->txtMain->toPlainText();
+
+    if (tempData == "") {
+        return;
+    }
+
+    QDateTime now = QDateTime::currentDateTime();
+    QString name = now.toString("yyyy-MM-dd-HH-mm-ss");
+    QString fileName = QString("%1/%2.txt").arg(QUIHelper::appPath()).arg(name);
+
+    QFile file(fileName);
+    file.open(QFile::WriteOnly | QIODevice::Text);
+    QTextStream out(&file);
+    out << tempData;
+    file.close();
+
+    on_btnClear_clicked();
+}
+
+void frmComTool::on_btnOpen_clicked()
+{
+    if (ui->btnOpen->text() == "打开串口") {
+        com = new QextSerialPort(ui->cboxPortName->currentText(), QextSerialPort::Polling);
+        comOk = com->open(QIODevice::ReadWrite);
+
+        if (comOk) {
+            //清空缓冲区
+            com->flush();
+            //设置波特率
+            com->setBaudRate((BaudRateType)ui->cboxBaudRate->currentText().toInt());
+            //设置数据位
+            com->setDataBits((DataBitsType)ui->cboxDataBit->currentText().toInt());
+            //设置校验位
+            com->setParity((ParityType)ui->cboxParity->currentIndex());
+            //设置停止位
+            com->setStopBits((StopBitsType)ui->cboxStopBit->currentIndex());
+            com->setFlowControl(FLOW_OFF);
+            com->setTimeout(10);
+
+            changeEnable(true);
+            ui->btnOpen->setText("关闭串口");
+            timerRead->start();
+        }
+    } else {
+        timerRead->stop();
+        com->close();
+        com->deleteLater();
+
+        changeEnable(false);
+        ui->btnOpen->setText("打开串口");
+        on_btnClear_clicked();
+        comOk = false;
+    }
+}
+
+void frmComTool::on_btnSendCount_clicked()
+{
+    sendCount = 0;
+    ui->btnSendCount->setText("发送 : 0 字节");
+}
+
+void frmComTool::on_btnReceiveCount_clicked()
+{
+    receiveCount = 0;
+    ui->btnReceiveCount->setText("接收 : 0 字节");
+}
+
+void frmComTool::on_btnStopShow_clicked()
+{
+    if (ui->btnStopShow->text() == "停止显示") {
+        isShow = false;
+        ui->btnStopShow->setText("开始显示");
+    } else {
+        isShow = true;
+        ui->btnStopShow->setText("停止显示");
+    }
+}
+
+void frmComTool::on_btnData_clicked()
+{
+    QString fileName = QString("%1/%2").arg(QUIHelper::appPath()).arg("send.txt");
+    QFile file(fileName);
+    if (!file.exists()) {
+        return;
+    }
+
+    if (ui->btnData->text() == "管理数据") {
+        ui->txtMain->setReadOnly(false);
+        ui->txtMain->clear();
+        file.open(QFile::ReadOnly | QIODevice::Text);
+        QTextStream in(&file);
+        ui->txtMain->setText(in.readAll());
+        file.close();
+        ui->btnData->setText("保存数据");
+    } else {
+        ui->txtMain->setReadOnly(true);
+        file.open(QFile::WriteOnly | QIODevice::Text);
+        QTextStream out(&file);
+        out << ui->txtMain->toPlainText();
+        file.close();
+        ui->txtMain->clear();
+        ui->btnData->setText("管理数据");
+        AppData::readSendData();
+    }
+}
+
+void frmComTool::on_btnClear_clicked()
+{
+    append(0, "", true);
+}
+
+void frmComTool::on_btnStart_clicked()
+{
+    if (ui->btnStart->text() == "启动") {
+        if (AppConfig::ServerIP == "" || AppConfig::ServerPort == 0) {
+            append(6, "IP地址和远程端口不能为空");
+            return;
+        }
+
+        socket->connectToHost(AppConfig::ServerIP, AppConfig::ServerPort);
+        if (socket->waitForConnected(100)) {
+            ui->btnStart->setText("停止");
+            append(6, "连接服务器成功");
+            tcpOk = true;
+        }
+    } else {
+        socket->disconnectFromHost();
+        if (socket->state() == QAbstractSocket::UnconnectedState || socket->waitForDisconnected(100)) {
+            ui->btnStart->setText("启动");
+            append(6, "断开服务器成功");
+            tcpOk = false;
+        }
+    }
+}
+
+void frmComTool::on_ckAutoSend_stateChanged(int arg1)
+{
+    if (arg1 == 0) {
+        ui->cboxSendInterval->setEnabled(false);
+        timerSend->stop();
+    } else {
+        ui->cboxSendInterval->setEnabled(true);
+        timerSend->start();
+    }
+}
+
+void frmComTool::on_ckAutoSave_stateChanged(int arg1)
+{
+    if (arg1 == 0) {
+        ui->cboxSaveInterval->setEnabled(false);
+        timerSave->stop();
+    } else {
+        ui->cboxSaveInterval->setEnabled(true);
+        timerSave->start();
+    }
+}
+
+void frmComTool::connectNet()
+{
+    if (!tcpOk && AppConfig::AutoConnect && ui->btnStart->text() == "启动") {
+        if (AppConfig::ServerIP != "" && AppConfig::ServerPort != 0) {
+            socket->connectToHost(AppConfig::ServerIP, AppConfig::ServerPort);
+            if (socket->waitForConnected(100)) {
+                ui->btnStart->setText("停止");
+                append(6, "连接服务器成功");
+                tcpOk = true;
+            }
+        }
+    }
+}
+
+void frmComTool::readDataNet()
+{
+    if (socket->bytesAvailable() > 0) {
+        QUIHelper::sleep(AppConfig::SleepTime);
+        QByteArray data = socket->readAll();
+
+        QString buffer;
+        if (ui->ckHexReceive->isChecked()) {
+            buffer = QUIHelperData::byteArrayToHexStr(data);
+        } else {
+            buffer = QUIHelperData::byteArrayToAsciiStr(data);
+        }
+
+        append(5, buffer);
+
+        //将收到的网络数据转发给串口
+        if (comOk) {
+            com->write(data);
+            append(0, buffer);
+        }
+    }
+}
+
+void frmComTool::readErrorNet()
+{
+    ui->btnStart->setText("启动");
+    append(6, QString("连接服务器失败,%1").arg(socket->errorString()));
+    socket->disconnectFromHost();
+    tcpOk = false;
+}

tool/comtool/form/frmcomtool.h

@@ -0,0 +1,68 @@
+#ifndef FRMCOMTOOL_H
+#define FRMCOMTOOL_H
+
+#include <QWidget>
+#include "qtcpsocket.h"
+#include "qextserialport.h"
+
+namespace Ui
+{
+class frmComTool;
+}
+
+class frmComTool : public QWidget
+{
+    Q_OBJECT
+
+public:
+    explicit frmComTool(QWidget *parent = 0);
+    ~frmComTool();
+
+private:
+    Ui::frmComTool *ui;
+
+    bool comOk;                 //串口是否打开
+    QextSerialPort *com;        //串口通信对象
+    QTimer *timerRead;          //定时读取串口数据
+    QTimer *timerSend;          //定时发送串口数据
+    QTimer *timerSave;          //定时保存串口数据
+
+    int sleepTime;              //接收延时时间
+    int sendCount;              //发送数据计数
+    int receiveCount;           //接收数据计数
+    bool isShow;                //是否显示数据
+
+    bool tcpOk;                 //网络是否正常
+    QTcpSocket *socket;         //网络连接对象
+    QTimer *timerConnect;       //定时器重连
+
+private slots:
+    void initForm();            //初始化窗体数据
+    void initConfig();          //初始化配置文件
+    void saveConfig();          //保存配置文件
+    void readData();            //读取串口数据
+    void sendData();            //发送串口数据
+    void sendData(QString data);//发送串口数据带参数
+    void saveData();            //保存串口数据
+
+    void changeEnable(bool b);  //改变状态
+    void append(int type, const QString &data, bool clear = false);
+
+private slots:
+    void connectNet();
+    void readDataNet();
+    void readErrorNet();
+
+private slots:
+    void on_btnOpen_clicked();
+    void on_btnStopShow_clicked();
+    void on_btnSendCount_clicked();
+    void on_btnReceiveCount_clicked();
+    void on_btnClear_clicked();
+    void on_btnData_clicked();
+    void on_btnStart_clicked();
+    void on_ckAutoSend_stateChanged(int arg1);
+    void on_ckAutoSave_stateChanged(int arg1);
+};
+
+#endif // FRMCOMTOOL_H

tool/comtool/form/frmcomtool.ui

@@ -0,0 +1,533 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>frmComTool</class>
+ <widget class="QWidget" name="frmComTool">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>800</width>
+    <height>600</height>
+   </rect>
+  </property>
+  <layout class="QGridLayout" name="gridLayout_6">
+   <property name="leftMargin">
+    <number>6</number>
+   </property>
+   <property name="topMargin">
+    <number>6</number>
+   </property>
+   <property name="rightMargin">
+    <number>6</number>
+   </property>
+   <property name="bottomMargin">
+    <number>6</number>
+   </property>
+   <item row="0" column="0">
+    <widget class="QTextEdit" name="txtMain">
+     <property name="enabled">
+      <bool>true</bool>
+     </property>
+     <property name="frameShape">
+      <enum>QFrame::StyledPanel</enum>
+     </property>
+     <property name="verticalScrollBarPolicy">
+      <enum>Qt::ScrollBarAsNeeded</enum>
+     </property>
+     <property name="horizontalScrollBarPolicy">
+      <enum>Qt::ScrollBarAsNeeded</enum>
+     </property>
+     <property name="readOnly">
+      <bool>true</bool>
+     </property>
+    </widget>
+   </item>
+   <item row="0" column="1" rowspan="2">
+    <widget class="QWidget" name="widgetRight" native="true">
+     <property name="minimumSize">
+      <size>
+       <width>180</width>
+       <height>0</height>
+      </size>
+     </property>
+     <property name="maximumSize">
+      <size>
+       <width>180</width>
+       <height>16777215</height>
+      </size>
+     </property>
+     <layout class="QVBoxLayout" name="verticalLayout">
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
+      <item>
+       <widget class="QFrame" name="frameTop">
+        <property name="frameShape">
+         <enum>QFrame::Box</enum>
+        </property>
+        <property name="frameShadow">
+         <enum>QFrame::Sunken</enum>
+        </property>
+        <layout class="QGridLayout" name="gridLayout_3">
+         <property name="leftMargin">
+          <number>6</number>
+         </property>
+         <property name="topMargin">
+          <number>6</number>
+         </property>
+         <property name="rightMargin">
+          <number>6</number>
+         </property>
+         <property name="bottomMargin">
+          <number>6</number>
+         </property>
+         <item row="0" column="0">
+          <widget class="QLabel" name="labPortName">
+           <property name="text">
+            <string>串口号</string>
+           </property>
+          </widget>
+         </item>
+         <item row="0" column="1">
+          <widget class="QComboBox" name="cboxPortName">
+           <property name="sizePolicy">
+            <sizepolicy hsizetype="Preferred" vsizetype="Fixed">
+             <horstretch>1</horstretch>
+             <verstretch>0</verstretch>
+            </sizepolicy>
+           </property>
+           <property name="editable">
+            <bool>true</bool>
+           </property>
+          </widget>
+         </item>
+         <item row="1" column="0">
+          <widget class="QLabel" name="labBaudRate">
+           <property name="text">
+            <string>波特率</string>
+           </property>
+          </widget>
+         </item>
+         <item row="1" column="1">
+          <widget class="QComboBox" name="cboxBaudRate">
+           <property name="sizePolicy">
+            <sizepolicy hsizetype="Preferred" vsizetype="Fixed">
+             <horstretch>1</horstretch>
+             <verstretch>0</verstretch>
+            </sizepolicy>
+           </property>
+           <property name="editable">
+            <bool>true</bool>
+           </property>
+          </widget>
+         </item>
+         <item row="2" column="0">
+          <widget class="QLabel" name="labDataBit">
+           <property name="text">
+            <string>数据位</string>
+           </property>
+          </widget>
+         </item>
+         <item row="2" column="1">
+          <widget class="QComboBox" name="cboxDataBit">
+           <property name="sizePolicy">
+            <sizepolicy hsizetype="Preferred" vsizetype="Fixed">
+             <horstretch>1</horstretch>
+             <verstretch>0</verstretch>
+            </sizepolicy>
+           </property>
+          </widget>
+         </item>
+         <item row="3" column="0">
+          <widget class="QLabel" name="labParity">
+           <property name="text">
+            <string>校验位</string>
+           </property>
+          </widget>
+         </item>
+         <item row="3" column="1">
+          <widget class="QComboBox" name="cboxParity">
+           <property name="sizePolicy">
+            <sizepolicy hsizetype="Preferred" vsizetype="Fixed">
+             <horstretch>1</horstretch>
+             <verstretch>0</verstretch>
+            </sizepolicy>
+           </property>
+          </widget>
+         </item>
+         <item row="4" column="0">
+          <widget class="QLabel" name="labStopBit">
+           <property name="text">
+            <string>停止位</string>
+           </property>
+          </widget>
+         </item>
+         <item row="4" column="1">
+          <widget class="QComboBox" name="cboxStopBit">
+           <property name="sizePolicy">
+            <sizepolicy hsizetype="Preferred" vsizetype="Fixed">
+             <horstretch>1</horstretch>
+             <verstretch>0</verstretch>
+            </sizepolicy>
+           </property>
+          </widget>
+         </item>
+         <item row="5" column="0" colspan="2">
+          <widget class="QPushButton" name="btnOpen">
+           <property name="text">
+            <string>打开串口</string>
+           </property>
+          </widget>
+         </item>
+        </layout>
+       </widget>
+      </item>
+      <item>
+       <widget class="QTabWidget" name="tabWidget">
+        <property name="tabPosition">
+         <enum>QTabWidget::South</enum>
+        </property>
+        <property name="currentIndex">
+         <number>0</number>
+        </property>
+        <widget class="QWidget" name="tab">
+         <attribute name="title">
+          <string>串口配置</string>
+         </attribute>
+         <layout class="QGridLayout" name="gridLayout_5">
+          <property name="leftMargin">
+           <number>6</number>
+          </property>
+          <property name="topMargin">
+           <number>6</number>
+          </property>
+          <property name="rightMargin">
+           <number>6</number>
+          </property>
+          <property name="bottomMargin">
+           <number>6</number>
+          </property>
+          <item row="0" column="0">
+           <widget class="QCheckBox" name="ckHexSend">
+            <property name="text">
+             <string>Hex发送</string>
+            </property>
+           </widget>
+          </item>
+          <item row="0" column="1">
+           <widget class="QCheckBox" name="ckHexReceive">
+            <property name="text">
+             <string>Hex接收</string>
+            </property>
+           </widget>
+          </item>
+          <item row="1" column="0">
+           <widget class="QCheckBox" name="ckDebug">
+            <property name="text">
+             <string>模拟设备</string>
+            </property>
+           </widget>
+          </item>
+          <item row="1" column="1">
+           <widget class="QCheckBox" name="ckAutoClear">
+            <property name="text">
+             <string>自动清空</string>
+            </property>
+           </widget>
+          </item>
+          <item row="2" column="0" colspan="2">
+           <layout class="QGridLayout" name="gridLayout">
+            <item row="0" column="0">
+             <widget class="QCheckBox" name="ckAutoSend">
+              <property name="text">
+               <string>自动发送</string>
+              </property>
+             </widget>
+            </item>
+            <item row="0" column="1">
+             <widget class="QComboBox" name="cboxSendInterval">
+              <property name="sizePolicy">
+               <sizepolicy hsizetype="Expanding" vsizetype="Fixed">
+                <horstretch>0</horstretch>
+                <verstretch>0</verstretch>
+               </sizepolicy>
+              </property>
+             </widget>
+            </item>
+            <item row="1" column="0">
+             <widget class="QCheckBox" name="ckAutoSave">
+              <property name="text">
+               <string>自动保存</string>
+              </property>
+             </widget>
+            </item>
+            <item row="1" column="1">
+             <widget class="QComboBox" name="cboxSaveInterval">
+              <property name="sizePolicy">
+               <sizepolicy hsizetype="Expanding" vsizetype="Fixed">
+                <horstretch>0</horstretch>
+                <verstretch>0</verstretch>
+               </sizepolicy>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item row="3" column="0" colspan="2">
+           <widget class="QPushButton" name="btnSendCount">
+            <property name="text">
+             <string>发送 : 0 字节</string>
+            </property>
+           </widget>
+          </item>
+          <item row="4" column="0" colspan="2">
+           <widget class="QPushButton" name="btnReceiveCount">
+            <property name="text">
+             <string>接收 : 0 字节</string>
+            </property>
+           </widget>
+          </item>
+          <item row="5" column="0" colspan="2">
+           <widget class="QPushButton" name="btnStopShow">
+            <property name="text">
+             <string>停止显示</string>
+            </property>
+           </widget>
+          </item>
+          <item row="6" column="0" colspan="2">
+           <widget class="QPushButton" name="btnSave">
+            <property name="text">
+             <string>保存数据</string>
+            </property>
+           </widget>
+          </item>
+          <item row="7" column="0" colspan="2">
+           <widget class="QPushButton" name="btnData">
+            <property name="text">
+             <string>管理数据</string>
+            </property>
+           </widget>
+          </item>
+          <item row="8" column="0" colspan="2">
+           <widget class="QPushButton" name="btnClear">
+            <property name="text">
+             <string>清空数据</string>
+            </property>
+           </widget>
+          </item>
+          <item row="9" column="0" colspan="2">
+           <spacer name="verticalSpacer">
+            <property name="orientation">
+             <enum>Qt::Vertical</enum>
+            </property>
+            <property name="sizeHint" stdset="0">
+             <size>
+              <width>20</width>
+              <height>2</height>
+             </size>
+            </property>
+           </spacer>
+          </item>
+         </layout>
+        </widget>
+        <widget class="QWidget" name="tab_2">
+         <attribute name="title">
+          <string>网络配置</string>
+         </attribute>
+         <layout class="QGridLayout" name="gridLayout_2">
+          <property name="leftMargin">
+           <number>6</number>
+          </property>
+          <property name="topMargin">
+           <number>6</number>
+          </property>
+          <property name="rightMargin">
+           <number>6</number>
+          </property>
+          <property name="bottomMargin">
+           <number>6</number>
+          </property>
+          <item row="0" column="0" colspan="2">
+           <layout class="QGridLayout" name="gridLayout_4">
+            <item row="3" column="0">
+             <widget class="QLabel" name="labListenPort">
+              <property name="text">
+               <string>监听端口</string>
+              </property>
+             </widget>
+            </item>
+            <item row="1" column="0">
+             <widget class="QLabel" name="labServerIP">
+              <property name="text">
+               <string>远程地址</string>
+              </property>
+             </widget>
+            </item>
+            <item row="4" column="1">
+             <widget class="QComboBox" name="cboxSleepTime"/>
+            </item>
+            <item row="1" column="1">
+             <widget class="QLineEdit" name="txtServerIP">
+              <property name="text">
+               <string/>
+              </property>
+             </widget>
+            </item>
+            <item row="2" column="0">
+             <widget class="QLabel" name="labServerPort">
+              <property name="text">
+               <string>远程端口</string>
+              </property>
+             </widget>
+            </item>
+            <item row="2" column="1">
+             <widget class="QLineEdit" name="txtServerPort">
+              <property name="text">
+               <string/>
+              </property>
+             </widget>
+            </item>
+            <item row="4" column="0">
+             <widget class="QLabel" name="labSleepTime">
+              <property name="text">
+               <string>延时时间</string>
+              </property>
+             </widget>
+            </item>
+            <item row="3" column="1">
+             <widget class="QLineEdit" name="txtListenPort"/>
+            </item>
+            <item row="0" column="0">
+             <widget class="QLabel" name="labMode">
+              <property name="text">
+               <string>转换模式</string>
+              </property>
+             </widget>
+            </item>
+            <item row="0" column="1">
+             <widget class="QComboBox" name="cboxMode">
+              <item>
+               <property name="text">
+                <string>Tcp_Client</string>
+               </property>
+              </item>
+              <item>
+               <property name="text">
+                <string>Tcp_Server</string>
+               </property>
+              </item>
+              <item>
+               <property name="text">
+                <string>Udp_Client</string>
+               </property>
+              </item>
+              <item>
+               <property name="text">
+                <string>Udp_Server</string>
+               </property>
+              </item>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item row="2" column="0" colspan="2">
+           <widget class="QPushButton" name="btnStart">
+            <property name="text">
+             <string>启动</string>
+            </property>
+           </widget>
+          </item>
+          <item row="3" column="0" colspan="2">
+           <spacer name="verticalSpacer_2">
+            <property name="orientation">
+             <enum>Qt::Vertical</enum>
+            </property>
+            <property name="sizeHint" stdset="0">
+             <size>
+              <width>20</width>
+              <height>59</height>
+             </size>
+            </property>
+           </spacer>
+          </item>
+          <item row="1" column="0" colspan="2">
+           <widget class="QCheckBox" name="ckAutoConnect">
+            <property name="text">
+             <string>自动重连网络</string>
+            </property>
+           </widget>
+          </item>
+         </layout>
+        </widget>
+       </widget>
+      </item>
+     </layout>
+    </widget>
+   </item>
+   <item row="1" column="0">
+    <widget class="QWidget" name="widget" native="true">
+     <layout class="QHBoxLayout" name="horizontalLayout">
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
+      <item>
+       <widget class="QComboBox" name="cboxData">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Ignored" vsizetype="Fixed">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="editable">
+         <bool>true</bool>
+        </property>
+        <property name="duplicatesEnabled">
+         <bool>false</bool>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <widget class="QPushButton" name="btnSend">
+        <property name="minimumSize">
+         <size>
+          <width>80</width>
+          <height>0</height>
+         </size>
+        </property>
+        <property name="maximumSize">
+         <size>
+          <width>80</width>
+          <height>16777215</height>
+         </size>
+        </property>
+        <property name="text">
+         <string>发送</string>
+        </property>
+       </widget>
+      </item>
+     </layout>
+    </widget>
+   </item>
+  </layout>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>